Blodgett XR8-E - Manual (Page 21)

19
Operation
Programming a Product Recipe
NOTE: The control can hold 100 recipes. Each recipe
may have up to 6 cooking stages.
1. Turn the dial to highlight the name of the product to
be programmed. Press the center of the dial to select
the product.
2. The display reads PRODUCT NAME: STAGE 1.
Press the center of the dial to select the stage.
3. Rotate the dial, or use the alpha/numeric keypad to
enter the desired bake time. Press the center of the
dial to set the bake time.
4. Rotate the dial, or use the alpha/numeric keypad to
enter the desired bake temperature. Press the center
of the dial to set the bake temperature.
5. Rotate the dial, or use the alpha/numeric keypad to
enter up to two minutes of steam. Press the center of
the dial to set the steam time.
NOTE: The convection fan will not run during a
steam cycle. It is not necessary to set a fan
delay while steaming.
6. Rotate the dial to select the desired fan speed.
Choose from low or high. Press the center of the dial
to set the fan speed.
7. Rotate the dial, or use the alpha/numeric keypad to
enter up to 1 hour and 39 minutes of fan delay. Press
the center of the dial to set the fan delay.
8. Rotate the dial, or use the alpha/numeric keypad to
set the vent position. The vent may be opened from
0% to 100%. Press the center of the dial to set the
vent position.
9. Rotate the dial, or use the alpha/numeric keypad to
set the vent delay time. Entering a value of 0 means
the vent will open at the beginning of the bake cycle.
Press the center of the dial to set the vent delay time.
10. Use the dial to scroll down to PRODUCT NAME:
STAGE 2. Press the center of the dial to select stage
2.
11. Repeat steps 2-10 for all remaining stages.
12. When all stages have been programmed, press the
PROG KEY (12). Use the dial to scroll to SAVE. Press
the center of the dial to save the program.
MenuSelect™ Control