Blodgett XR8-E - Manual (Page 20)

18
Operation
MenuSelect™ Control
USING THE USB PORT
1. Remove the cover to the USB port and insert the USB
drive.
2. To turn the oven on press the POWER KEY. The dis-
play toggles between set and actual temperature.
3. Simultaneously press and hold the PROGRAM/EXIT
KEY and the FAN DELAY KEY.
4. Turn the dial to highlight either COPY RECIPE FROM
USB or COPY RECIPE TO USB, then press the cen-
ter of the dial to select.
5. When the transfer is complete the display returns to
the previous screen.
6. Press the PROGRAM/EXIT KEY.
7. Turn the dial to highlight YES. Press the center of the
dial to select.
8. Remove USB drive. Replace the cover to the USB
port.
PROGRAMMING
Entering the Program Mode
1. Press the PROGRAM KEY (12). If the control is pass-
word protected, the display reads ENTER CODE.
Use the alpha/numeric keypad to enter the manager
passcode 3124, then press the center of the dial to
enter the program mode.
Naming a Product Recipe
NOTE: Use the following procedure to name a new prod-
uct or edit the name of an existing product.
1. For a new recipe, turn the dial to the first open prod-
uct. Press the center of the dial to select.
To edit an existing name, rotate the dial to the name
to be changed. Press the center of the dial to select.
2. Use the dial to scroll down to Edit Name. Press the
center of the dial to enter the edit name menu.
3. Turn the dial or use the alpha/numeric keypad to se-
lect the first character. Press the center of the dial to
advance to the next character. Repeat for all remain-
ing characters.
NOTE: Product names may be up to 10 characters
long and can contain spaces. Use the #1 key
to insert spaces in a recipe name.
NOTE: To select letters using the keypad, press the
appropriate key once if you need the first let-
ter on the key, twice for the second and three
times for the third. For example to enter the
letter L press the #5 key three times.
4. Press the PROG KEY (12) to save the name and ad-
vance to product stage programming.