Aastra Telecom 53I - Manual (Page 105)

Sylantro Interoperability Features
RN-001029-00, Rev 03, Release 2.1 99
5i Series IP Phone Release Notes
Configuring MWI using the Aastra Web UI
Use the following procedure to configure the MWI for a single line or for all lines
on the phone using the Aastra Web UI.
Aastra Web UI
1 Click on Basic Settings-> Preferences->General.
2 In the “Message Waiting Indicator Line” field, select a single line from 1 to 9, or select “All” for all
lines. If you select a single line, the MWI illuminates when a voice mail message is pending on that
line. If you select all lines, the MWI illuminates when a voice mail message is pending on any line
from 1 to 9.
3 Click to save your changes.