Aastra Telecom 53I - Manual (Page 67)

Sylantro Interoperability Features
RN-001029-00, Rev 03, Release 2.1 61
5i Series IP Phone Release Notes
Configuring Centralized Conferencing Using the Configuration Files
You use the following parameter to configure centralized conferencing in the
configuration files:
Global Parameter
• sip centralized conf
Per-Line Parameter
• sip lineN centralized conf
Parameter –
sip centralized conf
Conference Server URI
(in Web UI)
Aastra Web UI Advanced->Global SIP Settings->
Basic SIP Network Settings
Configuration Files aastra.cfg, <mac>.cfg
Description Globally enables or disables SIP centralized conferencing for an IP
phone as follows:
•
To disable centralized conferencing, leave this field empty (blank).
• To enable SIP centralized conferencing, then do one of the following
actions:
— If you have specified a proxy server/registrar server, then to
reach the media server via the proxy server, set this field to
one of the following:
conf (Sylantro server), or
Conference (Broadsoft server)
By setting this field to conf , you specify conf@<proxy_server
_address>: <proxy_port>. For example, if the proxy server address
is 206.229.26.60 and the proxy port used is 10060, then by setting
this parameter to conf, you are specifying the following:
[email protected]:10060
— To reach the media server using a different address/port than
that specified by the proxy, set this field to the following:
conf@<media_server _address>: <media_port>
Format String
Default Value Blank
Example sip centralized conf: conf