Aastra web ui – Aastra Telecom 53I User Manual
Page 64
Sylantro Interoperability Features
58
RN-001029-00, Rev 03, Release 2.1
IP Phone Release Notes 2.1
3
In the “Autodial Timeout” field, specify a value for the timer as follows:
•
If you want the IP phone to autodial the number immediately (hotline) whenever the IP phone is
off-hook, accept the default value of 0.
•
If you want to specify a length of time for the IP phone to wait before dialing the number, enter
the length of time (in seconds). For example: 30
4
Click
to save your changes.
Per-Line Configuration
1
Click on Advanced Settings->Line <1 - 9>->Autodial Settings.
2
Do one of the following actions:
•
To allow this line to use the global autodial settings, click on the Use Global Settings parameter
to enable it, then click
to save your changes.
•
To specify a different autodial configuration for this specific line, disable the Use Global
Settings parameter. Then proceed to step 3.
Aastra Web UI