Aastra Telecom 53I - Manual (Page 82)

Sylantro Interoperability Features
76 RN-001029-00, Rev 03, Release 2.1
IP Phone Release Notes 2.1
Configuring ACD Auto-Available Timer Using Configuration Files
You use the following parameters to configure an ACD auto-configuration timer
in the configuration files:
• acd auto available
• acd auto available timer
Parameter –
acd auto available
Auto Available
(in Web UI)
Aastra Web UI Basic Settings->Preferences->
Auto Call Distribution Settings
Configuration Files aastra.cfg, <mac>.cfg
Description Enables the ACD timer to automatically reset the IP phone status to
“available.” Set to 0 = Off, Set to 1 = On
Format Binary
Default Value 0 (disable)
Range 0 (disable)
1 (enable)
Example acd auto available: 1
Parameters –
acd auto available timer
Auto Available Timer
(in Web UI)
Aastra Web UI Basic Settings->Preferences->
Auto Call Distribution Settings
Configuration Files aastra.cfg, <mac>.cfg
Description Specifies the length of time, in seconds, before the IP phone status
switches back to “available.”
Format integer
Default Value 60 (seconds)
Range 0 to 120 (seconds)
Example (<mac.cfg>) acd auto available timer: 60