Lens care, Supplied accessories, Optional accessories – Nikon 300mm-f-28G-IF-ED-AF-S-VR-Nikkor User Manual
Page 24: Specifications
24
En
12. Lens care
• Clean the lens surfaces with a blower brush. To remove dirt and smudges, use a soft, clean cotton
cloth or lens tissue moistened with ethanol (alcohol) or lens cleaner. Wipe in a circular motion
from center to outer edge, taking care not to leave traces or touch other parts of the lens.
• Never use thinner or benzene to clean the lens as this might damage it, result in a fire, or cause
health problems.
• When storing the lens in its lens case, attach both front and rear caps.
• When the lens will not be used for a long time, store it in a cool, dry place to prevent mold. Also
store the lens away from direct sunlight or chemicals such as camphor or naphthalene.
• Do not get water on the lens or drop it in water as this will cause it to rust and malfunction.
• Reinforced plastic is used for certain parts of the lens. To avoid damage, never leave the lens in
an excessively hot place.
13. Supplied accessories
*
• Slip-on front lens cap • Rear lens cap LF-1 • Lens hood HK-30
• Semi-soft case CL-L1 • Dedicated slip-in filter holder • 52mm screw-in NC filter
• Strap LN-1
* If dedicated accessories are broken or missing, contact your nearest Nikon service center or
representative office as they are not available at general shops.
14. Optional accessories
• 52mm screw-in filters (except circular polarizing filter II)
• Slip-in circular polarizing filter C-PL1L
• AF-S Teleconverters (TC-14EII/TC-17EII/TC-20EII)
15. Specifications
Type of lens:
G-type AF-S Nikkor lens having built-in CPU and Nikon bayonet
mount. Special vibration reduction (VR) mechanism incorporated
Focal length:
300mm
Maximum aperture:
f/2.8
Lens construction:
11 elements in 8 groups (3 ED glass and 2 Nano Crystal Coat-
deposited lens elements), as well as 1 protective glass
Picture angle:
8˚10’ [5˚20’ with Nikon digital cameras (Nikon DX format);
6˚40’ with IX240 system cameras]
Distance information:
Output to camera body
Focusing:
Nikon Internal Focusing (IF) system (utilizing an internal Silent Wave
Motor); manually via separate focus ring.
Vibration reduction:
Lens-shift method using voice coil motors (VCMs)