AmbiCom WL250N-AR - Manual (Page 16)

2-3-2 Setup Procedures For ‘Fixed-IP xDSL’:
1
2
3
4
IP address assigned by your Service Provider (1): Please input IP address assigned service provider
Subnet Mask (2): Please input subnet mask assigned by your service provider
DNS address (3): Please input the IP address of DNS server provided by your service
provider.
Service Provider Gateway Address (4): Please input the IP address of DNS server provided by your service
provider.
Note: You must use the addresses provided by your Internet service provider, wrong setting value will cause
connection problem.
When all settings are finished, you’ll see the following message displayed on your web browser:
Please click ‘Apply’ button to prepare to restart the router, and you’ll see this message:
Please wait for about 30 seconds, then click ‘OK!’ button. You’ll be back to router management interface again, and the router
is ready with new settings.
10