AmbiCom WL250N-AR - Manual (Page 24)

2-4-2 Changing The Management Password
Default password of this router is 1234, and it’s displayed on the login prompt when accessed from web browser. There’s a
security risk if you don’t change the default password, since everyone can see it. This is very important when you have
wireless function enabled.
Please click ‘System’ menu on the left of web management interface, then click ‘Password Settings’, and the following
message will be displayed on your web browser:
1
2
3
Current Password (1): Please input current password here.
New Password (2): Please input new password here.
Confirmed Password (3): Please input new password here again.
When you finish, click ‘Apply’. If you want to keep original password unchanged, click ‘Cancel’.
If the password you typed in ‘New Password’ (2) and ‘Confirmed Password’ (3) field are not the same, you’ll see the
following message:
Please retype the new password again when you see above message.
If you see the following message:
It means the content in ‘Current Password’ field is wrong, please click ‘OK’ to go back to previous menu, and try to input
current password again.
18