AmbiCom WL250N-AR - Manual (Page 48)

message will be displayed on your web browser:
Please wait for about 30 seconds, then click ‘OK!’ button. You’ll be back to router management interface again, and the router
is ready with new settings.
2-7-3 Wireless Security
It’s very important to set wireless security settings properly! If you don’t, hackers and malicious users can reach your
network and valuable data without your consent and this will cause serious security problem.
To set wireless security settings, Please click ‘Wireless’ menu on the left of web management interface, then click ‘Security
Settings’, then follow the following instructions to set wireless security settings:
2-7-3-1 Disable Wireless Security
When you select this mode, data encryption is disabled, and every wireless device in proximity will be able to connect your
wireless router if no other security measure is enabled (like MAC address access control - see section 2-7-4, or disable ESSID
broadcast).
Only use this option when you really want to allow everyone to use your wireless router, and you don’t care if there’s
someone reads the data you transfer over network without your consent.
42