AmbiCom WL250N-AR - Manual (Page 30)

2-5-3 Setup Procedures For ‘PPPoE’:
1
2
4
5
6
3
User Name (1): Please input user name assigned by your Internet service provider here.
Password (2): Please input the password assigned by your Internet service provider here.
Service Name (3): Please give a name to this Internet service. (Optional)
MTU (4): Please input the MTU value of your network connection here. (Use default value if you don’t know).
Connection Type (5): Please select the connection type of Internet connection you wish to use.
4. Continuous: Keep Internet connection alive, do not disconnect.
5. Connect on Demand: Only connects to Internet when there’s a connect attempt
6. Manual: Only connects to Internet when ‘Connect’ button on this page is pressed, and
disconnects when ‘Disconnect button is pressed.
Idle Time Out (6): Please input idle time out.
Specify the time to shutdown Internet connects after no internet activity is detected by minute. This
option is only available when connection type is ‘Connect on Demand’.
After you finish with all settings, please click ‘Apply’, the following message will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on router setup, or click ‘Apply’ to reboot the router so the
settings will take effect (Please wait for about 30 seconds while router is rebooting).
24