AmbiCom WL250N-AR User Manual
Page 67
3-3-1-1 Add PC
1
2
Client PC Description (1):
Please input any text to describe this IP address, up to 16 alphanumerical characters.
Client PC IP address (2):
Please input the starting IP address in the left field, and input the end IP address in the right field
to define a range of IP addresses, or just input the IP address in the left field to define a single IP
address.
Client PC Service (3):
Please check all services you want to allow or deny this IP address to use, you can check multiple
services.
Protocol (4):
If the service you need is not listed above, you can create a new service on your own. Please
select TCP or UDP, if you’re not sure, please select ‘Both’.
Port Range (5):
Please input the port range of new service here. If you want to specify port 80 to 90, please
input ’80-90’; if you want to apply this rule on a single port, just input the port number, like ‘80’.
Add (6):
When you finish with all settings, please click ‘Add’ to save settings, you’ll be brought back to
previous menu, and the rule you just set will appear in current IP filtering table.
6
4
5
3
61