AmbiCom WL250N-AR - Manual (Page 28)

2-5-1 Setup Procedures For ‘Dynamic IP’:
1
2
Host Name (1): Please input the host name of your computer, this is optional, and only required if your service provider
asks you to do so.
MAC address (2): If your service provider only permits computer with certain MAC address to access internet, please input
MAC address of your computer here. If you’re using the computer which used to connect to Internet via
cable modem, you can simply press ‘Clone Mac address’ button to fill the MAC address field with the
MAC address of your computer.
After you finish with all settings, please click ‘Apply’, the following message will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on router setup, or click ‘Apply’ to reboot the router so the
settings will take effect (Please wait for about 30 seconds while router is rebooting).
22