AmbiCom WL250N-AR - Manual (Page 42)

2-7-1 Basic Wireless Settings
Please click ‘Wireless’ menu on the left of web management interface, then click ‘Basic Settings’, and the following message
will be displayed on your web browser:
1
2
3
4
This wireless router can be work in 6 modes:
A. AP : Standard wireless AP (access point).
B. Station-Infrastructure : Configure the router to Ethernet device such us TV, Game player, HDD&DVD to enable the Ethernet
device be a wireless station.
C . AP Bridge-Point to Point: Connect this router with another wireless router, to expand the scope of network.
D . AP Bridge-Point to Multi-Point: Connect this router with up to four other wireless routers, to expand the scope of network.
E . AP Bridge-WDS: Connect this router with up to four WDS-capable wireless routers, to expand the scope of network.
F. Universal Repeater : The router can act as Station and AP at the same time. It can use Station function to connect to a Root
AP and use AP function to service all wireless stations within its coverage.
NOTE: For ‘AP Bridge-Point to Point’ and ‘AP Bridge-Point to Multi-Point’ mode, wireless router is operated in
wireless bridge dedicated mode – wireless router is only used to expand the scope of network, and no wireless
clients will be accepted. If you want to use your wireless router to expand the scope of network, and also accept
wireless clients, please select ‘AP Bridge-WDS’ or ‘Universal Repeater‘ mode.
Please select a proper operation mode you want to use from ‘Mode’ dropdown menu, and continue on other operation mode
specific settings:
AP - Please go to section 2-7-1-1
Station-Infrastructure - Please go to section 2-7-1-2
AP Bridge-Point to Point - Please go to section 2-7-1-3
AP Bridge-Point to Multi-Point - Please go to section 2-7-1-4
AP Bridge-WDS - Please go to section 2-7-1-5
Universal Repeater - Please go to section 2-7-1-6
36