AmbiCom WL250N-AR - Manual (Page 9)

1-5 Familiar With Your New Wireless Broadband Router
Front Panel
LED Name Light Status Description
POWER On Router is switched on and correctly powered.
On Wireless WPS function is enabled.
Off Wireless network is switched off. WLAN
Flashing Wireless LAN activity (transferring or receiving data).
On WAN port is connected.
Off WAN port is not connected. WAN
Flashing WAN activity (transferring or receiving data).
On LAN port is connected.
Off LAN port is not connected. LAN 1-4
Flashing LAN activity (transferring or receiving data).
Back Panel
Item Name Description
Antenna A / B These antennas are 3dBi dipole antennas.
Radio ON / OFF Switch the button to activate or deactivate the wireless functions.
Reset / WPS
Press and hold this button for 10 or more seconds to restore all settings to factory defaults. POWER LED
should flash rapidly.
Press and hold this button for less than 5 seconds to start WPS function.
1 - 4 Local Area Network (LAN) ports 1 to 4. Connect to computer.
WAN Wide Area Network (WAN / Internet) port.
Power Power connector, connects to A/C power adapter.
3