Nikon 70-200mm-f4G-ED-AF-S-VR-Zoom-Nikkor - Manual (Page 20)

20
En_03
En
Lens Care
Do not pick up or hold the lens or camera using only the lens hood.
Keep the CPU contacts clean.
Should the rubber lens‑mount gasket be damaged, cease use
immediately and take the lens to a Nikon‑authorized service center for
repair.
Use a blower to remove dust and lint from the lens surfaces. To remove
smudges and fingerprints, apply a small amount of ethanol or lens
cleaner to a soft, clean cotton cloth or lens‑cleaning tissue and clean
from the center outwards using a circular motion, taking care not to
leave smears or touch the glass with your fingers.
Never use organic solvents such as paint thinner or benzene to clean
the lens.
The lens hood or NC filters can be used to protect the front lens
element.
Attach the front and rear caps before placing the lens in its flexible
pouch.
If the lens will not be used for an extended period, store it in a cool, dry
location to prevent mold and rust. Do not store in direct sunlight or
with naphtha or camphor moth balls.
Keep the lens dry. Rusting of the internal mechanism can cause
irreparable damage.
Leaving the lens in extremely hot locations could damage or warp parts
made from reinforced plastic.
Supplied Accessories
 mm snap‑on Front Lens Cap LC‑
Rear Lens Cap LF‑
Bayonet Hood HB‑0
Flexible Lens Pouch CL‑122
Compatible Accessories
 mm screw‑on filters
Tripod collar ring RT‑1
AF‑I/AF‑S Teleconverters TC‑1E/TC‑1E
II/TC‑1E II */TC‑20E */
TC‑20E II */TC‑20E III *
Autofocus is available only with cameras that offer f/8 support.
■
•
•
•
•
•
•
•
•
•
•
■
•
•
•
•
■
•
•
•
*