Nikon 24mm-f-35D-PC-E-Nikkor - Manual (Page 31)

En
31
This lens can be revolved up to 90° right or left. By
revolving the lens, the shift function can be changed to
operate vertically, and the tilt function can be changed to
operate horizontally.
• Before rotating the lens, set the shift and tilt amount to
“0” by rotating the shift and tilt knob.
Note: When revolving the lens while using tilt and/or shift,
be careful to avoid nipping your fingers between the
lens and the camera body or scratching the camera
body with the lens. Failure to lock each knob can also
have the same effect.
• Push the revolving lever and rotate the lens holding the
square parts of the lens.
• Click stops are provided in 30° steps both right and left.
At 30° and 60°, you can rotate the lens without pushing
the revolving lever.
8. Focusing
Fig. 10
a Set the aperture to its maximum by pressing the
aperture stop-down button, and focus by rotating the
focus ring.
b Before shooting, press the aperture stop-down button
again to stop-down the aperture.