Blf status lamps, Dss key label, Dss key label template – Avaya INDeX 2030 User Manual

Page 28

Advertising
background image

Page 28 - DSS Keys

BLF Status Lamps

BLF Status Lamps

The DSS keys on 2050 & 2060 phones incorporate dual-colour BLF lamps. These

show the status of the number stored under the DSS key.
Red BLF Lamp Signals: Calls to/from other extensions.

Slow Flash: Call on line parked at another extension.
Fast Flash: Extension ringing.
Long On/Short Off: Extension or line busy.
Solid: Extension or line disconnected.
Green BLF Lamp Signals: Calls to your extension.

Slow Flash: Call on line parked at your extension.
Fast Flash: External call ringing your extension.
Solid: Call connected or held at your extension.
Alternate Green/Red Lamp Signal: Pilot Number.

Slow Flash: Caller ringing pilot number.

DSS Key Label

Next to the DSS keys is a label. You can remove the label cover to write on the card

below. You can also remove the label cover under the handset using the same

method (it has a single pin hole on the bottom edge).
To remove the label cover:
1. Insert a fine but not sharp point (e.g. end of a paper-clip) into one pin hole.

Squeeze the label to the right.

2. Repeat with the other pin hole.
3. Lift the label cover clear and remove the card insert.
To replace the label cover:
1. Replace the card insert.
2. Slide the tabs on the right-hand edge of the label cover into their slots.
3. Bow the label cover to slip the tabs on the left-hand edge of the label cover into

their slots.

DSS Key Label Template

A template for printing DSS key labels exists. It can be used with Word for Windows

6 or 7. Contact your System Manager for a copy of the template, alternatively you

can obtain it from the Avaya internet site

http://support.avaya.com

and/or from the

CD supplied with the handset.
To use the template:

1. Copy the file DSSKEYUK.DOT into the Word template directory, i.e. the

directory containing other .DOT files (this varies according to the version of

Word and other Microsoft programs that you use, typically it is the WINWORD

or TEMPLATE directory).

2. Start Word. Select File and then New.
3. From the list of templates select DSSKEYUK.
4. Follow the instructions included within the template.

Page 28 - DSS Keys

INDeX 10.0 2030/50/60 User's Guide

BLF Status Lamps

38DHB0002UKFN Issue 2 (07/2002)

Advertising
This manual is related to the following products: