Nikon S800c - Manual (Page 103)

81
When Turning On the Camera for the First Time
Us
in
g
An
d
roid
™ Pla
tfo
rm
Disconnecting from a Wi-Fi (Wireless LAN) Network
To end the Wi-Fi (Wireless LAN) connection, tap the selected Wi-Fi network in step
2 in “Setting Up a Wi-Fi (Wireless LAN) Network” (
A80) and tap Forget.
B
Notes About Wi-Fi (Wireless LAN) Networks
• For more information on configuring a private Wi-Fi (wireless LAN) network, contact your Wi-Fi
service provider.
• The camera may not be able to connect to some Wi-Fi (wireless LAN) networks. For details about a
particular network, contact the Wi-Fi service provider or a dealer.
• Wi-Fi (wireless LAN) networks use a wireless signal to transmit information, making them
convenient to use with devices within range of the signal. However, without the proper security
settings, unauthorized third parties may be able to access the network and cause harm. Security
settings are recommended, though it is solely the responsibility of the user to determine whether
or not to use them.
B
Note About Using Internet
You can use the Internet to access a variety of information, but there is a risk of infecting the camera
with a virus.
To help prevent virus infection, we recommend that you periodically scan for viruses (using tools
such as online virus scanners) and install anti-virus software.
C
Reducing Battery Power Consumption
Battery power consumption is increased when the Wi-Fi (wireless LAN) function is turned on,
because the camera continues to perform wireless communications. To turn off the Wi-Fi function,
tap the check box again in step 1 in “Setting Up a Wi-Fi (Wireless LAN) Network” (
A80).