Nikon S800c - Manual (Page 88)

66
Using ViewNX 2
Pla
yb
ac
k Fe
a
ture
s
3
Follow the on-screen instructions to install the software.
The following software is installed:
• ViewNX 2 (consisting of the 3 modules below)
- Nikon Transfer 2: For transferring images to the computer
- ViewNX 2: For viewing, editing, and printing transferred images
- Nikon Movie Editor: For basic editing of transferred movies
4
Exit the install.
• Windows: Click Yes.
• Mac OS: Click OK.
Transferring Images to the Computer
1
Choose how images will be copied to the computer.
Choose one of the following methods:
• Direct USB connection: Turn the camera on with the memory card inserted,
connect it to the computer using the included USB cable, and turn on the USB storage
option on the camera screen.
• SD card slot: If your computer is equipped with an SD card slot, the card can be
inserted directly in the slot.
• SD card reader: Connect a card reader (available separately from third-party
suppliers) to the computer and insert the memory card.
If a message is displayed prompting you to choose a program, select Nikon Transfer 2.
If the memory card contains a large number of images, it may take a while for
Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts.