Nikon S800c - Manual (Page 193)

E 77
Re
fe
re
n
ce
S
ec
ti
o
n
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Error Messages
Display Cause/Solution A
O (flashes)
Clock not set.
Set date and time.
84
Battery exhausted.
Battery exhausted.
Charge or replace battery.
12, 14
Battery
temperature high.
Battery temperature is high.
Turn off camera, and allow battery to cool down before
resuming use. When this message is displayed, the
power-on lamp starts flashing quickly and the monitor
turns off after 5 seconds.
19
The camera will
turn off to prevent
overheating. Inside of the camera or the memory card has become hot.
Turn off camera, and allow battery to cool down before
resuming use.
19
Camera
temperature high.
Wi-Fi disabled.
Inside of the camera has become hot, and the Wi-Fi
(wireless LAN) function has stopped.
Press OK and allow inside of camera to cool down before
resuming use.
–
Camera
temperature high.
Wireless disabled.
Inside of the camera has become hot, and the connection
between camera and smart device has been terminated.
Press OK and allow inside of camera to cool down before
resuming use.
–
Q ( ● flashes red)
Camera cannot focus.
• Refocus.
• Focus on another subject positioned at the same
distance from the camera as the intended subject.
24, 25
60
Please wait for the
camera to finish
recording.
Camera cannot perform other operations until recording
is complete.
Wait until message clears from display automatically
when recording is complete. Do not open the battery-
chamber/memory card slot cover during recording.
–