Operations with tv connection” (e16) – Nikon S800c User Manual
Page 132
E
16
Connecting the Camera to a TV (Playback on a TV)
Re
fe
Operations with TV Connection
While images are displayed full-frame on the TV, the previous or next image can be
viewed by dragging your finger across the camera monitor.
Thumbnail playback (
A62) and playback zoom (A61) are possible just as with
playback mode on the camera.
When the first frame of a movie is displayed, the movie can be played back by
holding your finger on the camera monitor and removing it after about 1 second.
• If you tap the monitor while playing back a movie, only the control panel is
displayed in the monitor. Tap the icons on the control panel to operate the
camera (
A73).
B
Notes About Connecting the HDMI Cable
• HDMI cable is not provided. Use a commercially available HDMI cable to connect the camera to a
high-definition TV. The output terminal on this camera is an HDMI mini connector (type C). When
purchasing an HDMI cable, be sure that the device end of the cable has an HDMI mini connector.
• An Image mode (E26) setting of r 2272×1704 or higher and a Movie options (E52)
setting of e HD 720p (1280×720) or higher are recommended for shooting images or
movies that will be played back on a TV via HDMI connection.
B
Connecting the Cable
Do not connect the HDMI cable and USB cable to the camera simultaneously.
B
If the Images Are Not Displayed on the TV
Make sure that the HDMI (
E61) setting in the setup menu conforms to the standard used by your
TV.