Nikon WT-4A D4 D3X D3 D800 D700 D300S D300 - Manual (Page 102)

90
P
C
M
o
d
e
/
C
o
nn
ec
ti
ng
to
the
C
o
m
p
u
te
r
Using the WT-4 with a Computer
PC Mode
In PC mode, a camera equipped with a WT-4 can be controlled
over a wireless or Ethernet network from a computer running
Camera Control Pro 2 (available separately) and photographs
saved directly to the computer hard disk instead of the camera
memory card.
Connecting to the Computer
Before connecting the WT-4, select [MTP/PTP] for the [USB] option
in the camera setup menu (pg. 7) and confirm that the host
computer is running.
1
Turn the camera off.
To access the network via Ethernet, connect the Ethernet
cable (pg. 2). Note that wireless transfer is disabled while an
Ethernet cable is connected. Disconnect the Ethernet cable
before accessing a wireless network. Turn the WT-4 off before
connecting or disconnecting the Ethernet cable.
2
Open the WT-4 USB connector cover and
connect the USB cable from the WT-4 to
the camera USB connector.
3
Turn the camera on.