Nikon WT-4A D4 D3X D3 D800 D700 D300S D300 - Manual (Page 93)

81
Thumbn
ai
l S
e
le
c
t M
o
de
/
Conne
cti
n
g
the
W
T
-4
Using the WT-4 with a Computer
Connecting the WT-4
Before connecting the WT-4, select [MTP/PTP] for the [USB] option
in the camera setup menu (pg. 7) and confirm that the host
computer is running.
1
Turn the camera off and insert the
memory card containing the pictures to
be sent (if the camera is equipped with
multiple memory card slots, the card can
be inserted into any slot).
To access the network via Ethernet, connect the Ethernet
cable (pg. 2). Note that wireless transfer is disabled while an
Ethernet cable is connected. Disconnect the Ethernet cable
before accessing a wireless network. Turn the WT-4 off before
connecting or disconnecting the Ethernet cable.
2
Open the WT-4 USB connector cover and
connect the USB cable from the WT-4 to
the camera USB connector.
3
Turn the camera on.
Front