Nikon WT-4A D4 D3X D3 D800 D700 D300S D300 - Manual (Page 116)

104
Pri
n
t M
o
d
e
/ Pri
n
ti
n
g
P
ic
tu
re
s
Using the WT-4 with a Computer
8
Print photographs from the [Print] menu
as described in the camera manual. To
exit the [Print] menu and return to the
top level of the [Wireless Transmitter]
menu, press 4.
9
Turn the WT-4 off and wait for the
POWER
LED (pg. 3) to turn from green to
yellow and then go out. Disconnect
the USB cable.
A
Print Mode
The following restrictions apply to the WT-4 print mode option:
• NEF (RAW) and TIFF images can not be printed. To print images in these
formats, transfer them to the computer and use ViewNX (supplied) or
optional software packages such as Capture NX.
• Index print is not available.
• Images will not be played back in the camera monitor when the K
button is pressed.
A
The Status LEDs
The POWER LED lights when the WT-4 is on. Signal quality is shown by the
LINK
LED: the faster the LED blinks, the better the signal and the faster data
can be transmitted. The ERROR LED blinks to show that an error has
occurred.
Status POWER LINK ERROR
WT-4 off I (off ) I (off ) I (off )
Connected to printer; pictures can be
printed
K (on) H (blinks) I (off )
Error connecting to printer K (on) I (off ) H (blinks)
WT-4 hardware or battery malfunction H (blinks) H (blinks) H (blinks)