Nikon WT-4A D4 D3X D3 D800 D700 D300S D300 - Manual (Page 187)

Appendices
175
Appendices
Creating ftp Profiles Using
Camera Menus
In transfer mode, the camera menus can be used in place of the WT-4
Setup Utility to create ftp profiles. Before creating an ftp profile with
the camera menus, set the camera [USB] option to [MTP/PTP] and
connect the WT-4. To prevent unexpected loss of power, be sure the
battery is fully charged or use an optional AC adapter.
1
Open the WT-4 USB connector cover and
connect the USB cable from the WT-4 to
the camera USB connector.
2
Turn the camera on.
D
Using the Menus
If the shutter-release button on the camera is pressed while menus are
displayed, the monitor will turn off and any changes to the current profile
will be lost. Select [Monitor off delay] in the Custom Settings menu and
choose a longer monitor off delay.
A
Firewalls
The WT-4 uses TCP ports 20 and 21 for ftp. It may be necessary to adjust
firewall settings before connecting to a server behind a firewall.
A
Editing Existing ftp Profiles
See the Menu Guide for information on using camera menus to edit
existing ftp profiles.
Power switch