Nikon LS-3500 - LS-3510 - Manual (Page 32)

4-4 Getting Started On The IBM
Software Reference for Scanners
The resolution setting under the preview window can be left at the default
setting of 100DPI. The approximate size of the output image should be 10 x 15
inches.
You are now ready to complete the final scan. Click on the scan button at the
lower right of the Main dialog. The scanner will begin the scanning cycle, making
three successive passes for red, green and blue. Within a moment or two, a
progress indicator dialog will appear, showing the approximate duration of the
scan and the portion remaining to be completed.
Fig. 19 Scanning Progress Indicator
Be sure not to open the dust cover during the scan. If it is opened, extraneous
light could adversely affect your scan and cause density changes to appear in the
image. This scan will take approximately 45 seconds to complete. A new window
containing the image and labeled
Untitled-1 will appear after the scan is complete.
You may save the image in the normal manner or close the window and begin
again.
Conclusion
You have completed Getting Started! Feel free to continue exploring on your
own, but if you need quick answers to any questions, don’t hesitate to consult the
User's Guide following this section. It provides complete descriptions of the plugin
controls so you can exploit the full functionality of your Nikon scanning system.