Nikon LS-3500 - LS-3510 - Manual (Page 53)

Using the Windows Scanner Plugin 6-3
Software Reference for Scanners
LS-3500 is set to address 15 by default and the LS-3510AF is set to address 10 by
default.
For either interface, the Test Interface button will try to initiate contact with
the scanner. If this is successful, the plugin will display the scanner's type and
ROM version.
Scanner Tools
Fig. 57 The Scanner Tools Button
The Scanner Tools can be used to communicate directly with the scanner and
to calibrate the lamp. If you need assistance in understanding some of the scanner
commands, consult the Technical Programmer's Reference for your scanner,
available from Nikon. The Scanner Tools button will be disabled if the plugin
cannot establish contact with a scanner.
Fig. 58 The Scanner Tools Dialog
The Command text edit box allows you to enter scanner commands.
Pressing enter will send the command to the scanner and make the Read button
the default button so that pressing enter again will read data from the scanner. All
communication with the scanner will be displayed in the scrolling edit box.