Nikon LS-3500 - LS-3510 - Manual (Page 46)

5-14 Using The Macintosh Scanner Plugin
Software Reference for Scanners
now become active), or the focus stage position text edit box. The focus stage will
move from 0 to 48. Most focus positions are in the area of 24 for slides mounted
in plastic.
The Settings Buttons
Fig. 43 Settings
To save the complete scanner plugin configuration so that the same initial or
default settings are loaded every time the plugin is opened, use the Set Defaults
button. After you have made changes to the controls during a scan, if you wish to
reset the plugin to the established default, use
Reset.
Toolkit
Fig. 44 Toolkit Button
The toolkit button leads to a utilities dialog where you can send low–level
scanner commands, calibrate and test all scanner functions. This is a diagnostic
tool and care should be taken when you use it.
Fig. 45 Utilities Dialog
If you need assistance in understanding some of the scanner commands,
consult the LS-3510AF Technical & Programmer's Reference, available from
Nikon. Call your Nikon Electronic Imaging Dealer or Nikon Technical Support if
you require further assistance.