Nikon P6000 - Manual (Page 131)

117
U
p
lo
ad
in
g
P
ic
tures t
o
the
m
y P
ic
turetow
n
S
er
ver (
P
ic
ture
B
a
nk
)
Using Picture Bank
Uploading All Pictures at Once
The camera automatically starts charging and upload pictures that have not yet
been uploaded to the my Picturetown server whenever the AC adapter and the
LAN network is connected to the camera.
1
Connect the power cable and AC adapter 1.
2
Make sure that the power-on lamp is off 2.
• Do not turn on the camera. Picture upload cannot be initiated when the camera is
turned on.
3
Connect the network device with the camera using the LAN cable 3.
4
Connect the AC adapter to the camera’s DC input connector 4.
• The DC input connector should be fully inserted.
5
Plug the power cable into an outlet 5.
• When the camera is turned on and the message Starting upload to Picture Bank is
displayed, uploading of pictures will begin ( A119).
• If sender setting has not been configured, enter your Email ID (e-mail address) and
Nickname (alias) necessary for my Picturetown user information ( A110).
• After using Picture Bank to upload pictures for the first time using the camera, proceed
with user registration with my Picturetown ( A114).
D
Modifying the Automatic Picture Bank Upload Setting
Change the settings for the AC adapter and LAN connections in Picture Bank of the network settings
menu (
A107). If On (default setting) is changed to Off, the battery will begin charging immediately
without uploading pictures when the camera is turned off and the AC adapter and the LAN network
is connected to the camera.
1
2
3
4
5