Nikon P6000 - Manual (Page 165)

151
Shooting Options: The Shooting Menu
S
h
ooti
n
g
, Pl
ay
back
and S
e
tup M
e
nus
Picture Control
• White balance will change to Auto when Picture Control is set to
Monochrome. Selecting an option other than Monochrome for Picture
Control restores the original White balance setting.
• Contrast cannot be adjusted when Active D-Lighting is set to any mode other
than Off.
ISO sensitivity
• ISO sensitivity, 3200 and 6400 cannot be used when Image quality is set to
NRW (RAW), NRW (RAW) + Fine, NRW (RAW) + Normal or NRW (RAW) +
Basic.
When ISO sensitivity is set to 3200 or 6400 and Image quality is set to NRW
(RAW), NRW (RAW) + Fine, NRW (RAW) + Normal or NRW (RAW) + Basic, ISO
sensitivity will be set to Auto.
• When ISO sensitivity is set to 3200 or 6400, Image size cannot be set to
N 4224×3168, E 3264×2448, D 2592×1944, I 4224×2816,
G 4224×2376, and H 3168×3168.
At these image size settings, selecting 3200 or 6400 for ISO sensitivity
automatically switches the image size setting to C 2048×1536. When any
option other than 3200 or 6400 is next selected for ISO sensitivity, the original
image size setting is restored.
• At an ISO sensitivity setting of 3200 or 6400, the Multi-shot 16 option of the
continuous shooting mode is not available. When Continuous is set to Multi-
shot 16, selecting 3200 or 6400 for ISO sensitivity switches the setting to
Single, and Single will not be changed even if changed to modes other than
3200 or 6400.
• If ISO sensitivity is set to High ISO sensitivity auto or a setting higher than
1600, Active D-Lighting will not function.
Continuous
• Auto bracketing will change to Off when Continuous is set to any mode other
than Single.
• Selecting Multi-shot 16 changes Image quality setting to Normal and Image
size setting to D 2592×1944.
Auto bracketing
When Auto bracketing is set to any mode other than Off, Continuous will be set
to Single and the flash mode will be disabled (W).