Nikon P6000 - Manual (Page 202)

188
Error Messages
Te
ch
n
ic
a
l N
o
te
s
p
(blinks)
Group A has not been
selected for group
setting when shooting
using wireless lighting.
Set the group setting of the master
commander and remote flash to Group
A.
180
Lens error
Q
Lens is not operating
properly.
Turn camera off and then on again. If
error persists, contact retailer or Nikon-
authorized service representative.
17
Lens cover error
Q
Lens cover does not
open.
Finger or other obstructions are
preventing lens cover from opening.
Remove any obstructions from the lens
cover and turn on the camera again.
6
P
Communications
error
USB cable
disconnected during
transfer or printing.
Turn camera off and reconnecting
cable.
92, 96
System error
Q
Error has occurred in
camera’s internal
circuitry.
Turn camera off, remove and reinsert
battery, and turn camera on. If error
persists, contact retailer or Nikon-
authorized service representative.
17
N
Battery exhausted.
Transfer terminated.
Battery exhausted
during picture upload.
Use the AC Adapter EH-66 or charge the
battery. Turn the camera on and upload
the picture again.
18, 117
P
Connection error.
LAN cable was
disconnected during
connection, or LAN
cable is not being
attached.
Turn camera off and reconnect the
cable.
117, 118
Connection to the
server failed, or error
occurred during
picture upload.
Choose Resume and press the k
button. Attempt connection to the
server again. -
P
User information
incorrect.
Camera is not certified
to connect to the
network.
Press the k button. -
P
Server is full.
Picture Bank is full. Delete pictures from the server. -
P
Service not available.
Cannot use
my Picturetown
network service.
Press the k button. -
Display Description Solution A