Error messages – Nikon P6000 User Manual
Page 199
185
Te
ch
n
ic
a
l N
o
te
s
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display
Description
Solution
A
O
(blinks)
Clock not set.
Set clock.
B
Battery running low.
Prepare to charge or change battery.
N
Battery exhausted.
Battery exhausted.
Recharge or replace with a fully-
charged battery.
P
Battery temperature
high
Battery temperature is
high.
Turn off camera, and allow battery to
cool down before resuming use. After
five seconds, this message will
disappear, the monitor will turn off, and
the power-on lamp will blink rapidly.
After the lamp blinks for three minutes,
the camera will turn off automatically,
but you can also press the power switch
to turn it off manually.
N
Memory card is write
protected.
Write-protect switch is
in “lock” position.
Slide write-protect switch to “write”
position.
P
This card cannot be
used.
Error accessing
memory card.
• Use an approved card.
• Check that connectors are clean.
• Confirm that memory card is
correctly inserted.
P
This card cannot be
read.
P
Card is not formatted.
Format card?
No
Yes
Memory card has not
been formatted for use
in COOLPIX P6000.
Choose Yes and press the
k button to
format card.
N
Out of memory.
Memory card is full.
• Choose lower image quality or
smaller image size.
• Delete pictures or sound files.
• Insert new memory card.
• Remove memory card and use
internal memory.