Nikon P6000 - Manual (Page 210)

196
Troubleshooting
Te
ch
n
ic
a
l N
o
te
s
GPS
Network
Problem Cause/Solution A
Power lamp flickers
when camera is
turned off
Camera was turned off with GPS menu Record GPS data
set to On.
62
A long time is
taken for
positioning.
About two hours have passed without receiving any signals
from GPS satellite.
62
Positional
information have
not been recorded
to pictures
• Positional information will not be recorded when the y
mark is displayed in the screen while shooting. Check the
GPS status before shooting.
• Positioning has not been possible for a period of time
more than the valid storage period.
61
63
The place of
shooting and
positional
information does
not match. • The current location is different from the position of last
update.
• Update the positional information.
• There may be mistakes depending on the positioning
environment.
63
63
62
Problem Cause/Solution A
Connection to the
access point or
server failed.
Network settings stored in the camera may not be the same
as those for the LAN to which connection was attempted.
Confirm network profile information using the camera’s
network settings menu.
109
Connection was
terminated during
picture upload,
and upload failed.
• LAN cable is not correctly connected.
• Battery is low. 117, 118
24
E-mail notification
requesting user
registration with
my Picturetown
not sent.
Be sure that the e-mail address specified for sender
information is correct.
110
Cannot upload
pictures stored in
the internal
memory.
Eject the memory card to upload pictures stored in internal
memory.
22
Pictures uploaded
using the Picture
Bank service not
saved to my
Picturetown.
Use a computer to open the e-mail notification requesting
user registration, click the URL provided, and register the
camera’s key information.
114