Alpine TME-M710 User Manual
Page 16
15
-EN
4
Remove the main unit from the stand.
5
Remove the mount from the stand and stick it to
the dashboard etc..
Remove any dirt on the place to install, using the
supplied cloth.
• If the temperature in the car is low (Winter), then first
heat up the place where you are going to stick the
mount with a hairdryer etc.
• Do not apply force to the mount, or expose to
humidity, within 24 hours after attaching.
• If the mount is not firmly stuck, then we recommend
that you attach with the supplied fixing screws.
6
Attach the main unit to the stand as shown in step
2.
Use the cable clamps to fix the cables.
• Before using, check that the main unit and the stand,
and the stand and the place where it is attached to
the car are fixed securely.
Fixing screws
(M4 x 12 Supplied)
If the place of
attachment is
curved, then
bend this part
to match the
shape.
Mount