Alpine TME-M710 - Manual (Page 7)

6
-EN
Basic Operation
7 Dimmer adjustment (DIMMER)
AUTO : Turning on/off the headlight switches
the screen brightness between
DIMMER HI LEVEL and DIMMER LO
LEVEL.
LOW : The backlighting is set to the value
adjusted at “DIMMER LO LEVEL”.
HIGH : The backlighting is set to the value
adjusted at “DIMMER HI LEVEL”.
8 Dimmer HIGH level adjustment (DIMMER HI
LEVEL)
Adjusts the HIGH LEVEL (16 (MIN) to 31
(MAX)) of the dimmer.
9 Dimmer LOW level adjustment (DIMMER LO
LEVEL)
Adjusts the LOW LEVEL (0 (MIN) to 15
(MAX)) of the dimmer.
p Change sound output (SOUND OUT)
MONITOR : Outputs sound through the
built-in speakers.
HEADPHONE : Outputs sound to
headphones if connected.
* Note that sound will not be output unless
the audio output settings are appropriate.
3 Color depth adjustment (COLOR)
Change depth can be adjusted from –15
(MIN) to +15 (MAX).
* Adjustment cannot be made in the
NAVIGATION (RGB connection) mode.
4 Tint tone adjustment (TINT)
Tint tone can be adjusted from G15 (G MAX)
to R15 (R MAX).
* Adjustment cannot be made in the
NAVIGATION (RGB connection) mode.
5 Contrast adjustment (CONTRAST)
Contrast can be adjusted from –15 (LOW) to
+15 (HIGH).
6 Screen quality adjustment (SHARP)
Screen quality can be adjusted from –15
(SOFT) to +15 (HARD).
* Adjustment cannot be made in the
NAVIGATION (RGB connection) mode.
• If 2 to 6 are adjusted, VISUAL EQ mode in 1
changes to “CUSTOM”.