Alpine TME-M710 - Manual (Page 6)

5
-EN
Switching the display mode
1
Press the DISP button.
Each press of the button will cycle through the
modes as follows:
Normal images are
expanded uniformly in
the horizontal direction
and are displayed over
the entire screen.
Normal images are
expanded in the
horizontal and vertical
directions. The top and
bottom of the image are
cut off. This mode is
suited for 16:9 cinema
size images.
Normal image (4:3)
CINEMA
WIDE
NORMAL
WIDE CINEMA NORMAL
Adjusting
1
Press and hold the SELECT button for at least 2
seconds.
Adjustment screen will appear.
2
Press the SELECT or DISP button and select
the mode to be adjusted.
Adjust by pressing the
or button.
SELECT : Selects the mode. (downward)
DISP
: Selects the mode. (upward)
or : Adjusts.
1 VISUAL EQ mode (manufacturer’s settings)
selection (VISUAL EQ MODE)
OFF : Default setting.
NIGHT M. : Suitable for movies with a lot
of dark scenes.
SOFT : Suitable for movies with
computer graphics or
animation.
SHARP : Suitable for old movies whose
resolution is unclear.
CONTRAST : Suitable for the latest movies.
• Set this function to “OFF” to return to the default
values after changing between modes “NIGHT M.”
and “CONTRAST” and adjusting the image
brightness, color density and so on.
2 Brightness adjustment (BRIGHT)
Allows the brightness (–15 (MIN)~+15
(MAX)) of the picture.
Continued