Setup, General setups – Alpine TME-S370 User Manual

Page 13

Advertising
background image

11

-EN

Setup

The operation cannot be performed while the vehicle is
in motion. In order to operate the setup, enable lock-out
function. See page 21 for details.

General Setups

You can fl exibly customize the unit to suit your own
preferences and usage.

Use steps 1 through 4 to select one of the Setup
modes to modify. See the applicable section
below for details about the selected Setup item.

1

Touch [

] on Source Select screen.

The System Setup screen is displayed.

2

Touch the desired setup item.

1

2

3

4

1

System Setup

Dimmer / Dimmer Low Level / Base Color /
Beep.

2

Aux Setup

Source Name / TV System / Video Signal / HU
Vol. Control.

3

Navigation Setup

Nav Interrupt / Nav Interrupt Delay / Region

4

Camera Setup

Camera Interrupt / Horizontal Flip / Vertical Flip

3

To change an item’s setting(s) touch [ ]

or [

] for the desired item.

• When there are no more selections to view, the

arrow turns gray.

4

Touch [

] to exit setup menu.

System Setup Operations

1

2

1

Touch this to screen alignment settings (See
page 12).

2

Default

Touch this to restore settings to factory default
settings.
Returns to the factory default settings of System
setup. The message, "Restore default settings?"
appears. Touch "Restore" to go back to the
default settings.

• Pressing and holding the Default button resets

all settings including display setups.
The message, "Restore all default settings?"
appears. Press "Restore" to go back to the
factory setting.

Setting the Brightness of the

Backlighting (Dimmer)

High / Low / Auto (Default Setting)

The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier
viewing.

High: Sets the strongest brightness of the screen.

Low: Sets the brightness of the screen to the same

brightness that was set in Dimmer Low Level
in “Adjusting the Minimum Level of Backlight
(Dimmer Low Level)” (see instructions on page
12).

Auto: Adjusts the brightness of the background

illumination of the monitor automatically to the
brightness of the car interior.

290533_TME370_r13.indb E11

290533_TME370_r13.indb E11

7/29/09 1:29:14 PM

7/29/09 1:29:14 PM

Advertising