Alpine TME-S370 - Manual (Page 6)

4
-EN
Location of Controls
1
2
3 4 5
6 7 8
1 Remote IR Receiver
The IR receiver receives the remote IR command
from the remote controller of connected devices.
2 Ambient Light Sensor
Changes the LCD backlight and the soft-touch
key backlit automatically, when the surrounding
brightness changes.
3 Volume Buttons
Adjust the volume level by pressing the or
buttons. AUX and Navigation independently
controls volume.
-For details, refer page 12.
4 SOURCE Button
Returns to Source Select screen.
5
(POWER)/Mute
Turns the monitor power On and Off.
The monitor power turns Off when press and
hold the power button for 2 seconds. Power
button changes to red in standby mode.
Turns Mute on when press the power button,
when the unit is turned on.
The mute icon appears on the screen.
6 Built-in Speaker
Outputs sound for AUX and Navigation guidance.
7 AMPS Mounting Hole
Universal AMPS accessory is available in any
third party dealer.
8 Locking Connector to the hideaway box
Connects to the hideaway box.
Make sure to lock properly.
Turning Power On and Off
1
Press
POWER to turn on the unit.
2
Press and hold
POWER for 2 seconds to
turn off the unit.
• Some operations cannot be performed while the
vehicle is in motion. In order to operate, enable lock-
out function. See page 21 for details.
Adjusting the Volume and Mute
1
Adjust the volume level by pressing or
.
Turn the volume up to turn Off mute.
• If “Changing Sound Output (HU Vol. Control)”
(page 12) is set to on, you can adjust HU speaker
volume.
• The volume control bar disappears after 3 seconds
once the volume operation is completed.
• The volume bar does not indicate when the HU
volume control mode is on.
Getting Started
290533_TME370_r13.indb E4 290533_TME370_r13.indb E4 7/29/09 1:29:12 PM 7/29/09 1:29:12 PM