Alpine TME-S370 - Manual (Page 15)

13
-EN
Navigation Setup Operations
Adjusts the Navigation display setting.
Refer to page 14 for details.
Returns to the factory default settings of
Navigation setup. The message, "Restore
default settings?" appears. Touch "Restore" to
go back to the default settings.
Setting Output of the Navigation Guidance
Interpretation (Nav. Interrupt)
Off / Voice / Video
AUX operation cannot be performed while the
vehicle is in motion.
When the navigation destination is set, the
navigation interrupts the AUX screen that is currently
displayed whenever navigation guidance is made.
Off: The navigation guidance will not interrupt the
AUX screen and audio.
Voice: The navigation voice interrupts the AUX sound.
Video: The screen switches to the Navigation screen
whenever navigation guidance is made.
Setting Delay Timing of the Navigation Guidance
Interruption (Nav Interrupt Delay)
Off / 5 sec / 10 sec / 15 sec
Off: The Navigation screen returns to the screen
after guidance is complete.
5 sec: The Navigation screen disappears 5 seconds
after guidance is complete.
10 sec: The Navigation screen disappears 10 seconds
after guidance is complete.
15 sec: The Navigation screen disappears 15 seconds
after guidance is complete.
Setting Region Manually
USA / Europe
You can switch the navigation region manually.
Camera Setup Operations
Adjusts the Camera display setting. Refer to
page 14 for details.
Returns to the factory default settings of
Camera setup. The message, "Restore default
settings?" appears. Touch "Restore" to go
back to the default settings.
Setting Output of the Rearview Camera
Interruption
Off / On
Off: In this mode, the rearview does not appear on
the screen whenever the vehicle is placed in
reverse gear.
On: In this mode, the screen switches to rearview
screen whenever the vehicle is placed in reverse
gear.
Flipping the Screen Horizontally
Off / On
This function allows you to see the rearview as a
mirror image on the screen.
Off: The images on the screen appear normally.
On: The images on the screen appear mirrored.
Flipping the Screen Vertically
Off / On
This function is useful if the camera is mounted
upside down.
Off: The images on the screen appear normally.
On: The images on the screen appear upside
down.
290533_TME370_r13.indb E13 290533_TME370_r13.indb E13 7/29/09 1:29:15 PM 7/29/09 1:29:15 PM