Alpine TME-S370 - Manual (Page 7)

5
-EN
Switching the Source
1
Touch the desired source on Source
Select screen.
4
1 2 3
1 AUX
The AUX Input screen is displayed.
• The name given as the source name in “Source
Name” under AUX Setup Operation on page 12
is displayed.
• Refer to the section titled “Auxiliary Device
Operation” on page 6 for details.
2 Nav (Navigation)
The Navigation screen is displayed.
• For navigation operation, refer to the Owner's
Manual for the navigation system.
• Refer to page 13 for Navigation Setup
Operation.
3 Rearview Camera
Camera input is displayed, when the car is in
reverse gear OR the rearview camera is selected
on Source Select screen.
• For operation, refer to the Owner's Manual for
the rearview camera.
• Refer to page 13 for Camera Setup Operation.
• To enable to use reverse wire, camera interrupt
must be on reverse. See page 13 for detail.
4 SETUP
The System Setup screen is displayed.
• For details, refer to “Setup” (page 11).
290533_TME370_r13.indb E5 290533_TME370_r13.indb E5 7/29/09 1:29:13 PM 7/29/09 1:29:13 PM