ARCHOS 604 - Manual (Page 8)

6
ENGLISH
Making a Recording Using the CamCorder Application of your ARCHOS Device
On the Home Screen Home Screen, select the CamCorder CamCorder icon and press OK to open the CamCorder application.
Your ARCHOS device now powers the camera. On the screen, you see the image the camera is cur-
rently seeing. This preview screen thus permits you to adjust the position or direction of the camera
before you start your recording.
Settings Settings
A number of settings such as resolution and bitrate can be adjusted. Normally you need not change
these settings.
To access these recording parameters
To access these recording parameters, press MENU and select the Settings Settings menu item.
To return to the pre-recording screen To return to the pre-recording screen, press the ARCHOS device’s button.
Setting the
Time Stamp parameter to ‘ON’ will show the date and time on the recorded image.
Note: Note: For information on the other settings, please refer to the section on making a video recording in the user
manual of your ARCHOS device. Please note that the parameter Format does not exist as the setting is pre-deter-
mined by the camera. For the same reason, the parameter Source can only be set to ‘Composite’ or ‘Black & White’.
To start recording To start recording, press the OK button or select the Start recording Start recording menu item.
To pause and restart your recording To pause and restart your recording, press the OK button or select the Pause Pause or Resume Resume menu item.
To stop and save your recording To stop and save your recording, press the button.
Note:
Note: alternatively, you can press the Start/Stop button on your camera controller to start and stop
the recording.
•
•
•
•
•
•
•
•
•
x04_HelmetCam_Manual_v2_PN1049836 6 x04_HelmetCam_Manual_v2_PN1049836 6 19/09/2006 14:06:01 19/09/2006 14:06:01