Sony RM-AX4000 - Manual (Page 100)

Downloading the settings to the Remote Commander
You can send (dow nload) the settings you made w ith AX Remote Editor to the Remote Commander through the USB mini cable.
1. Conne ct the Re m ote Com m ande r (RM -AX4000) to your PC w ith the USB m ini cable .
Note s
o Do not disconnect the USB mini cable from your PC until dow nloading is complete, otherw ise a malfunction may occur.
o Only connect one Remote Commander to your PC at a time. Otherw ise, you w on't be able to dow nload the settings correctly.
2. Click "File " on the m e nu bar, the n s e le ct "Dow nload to Re m ote ."
The "Dow nload to Remote" dialog box appears.
Hints
o If the project you are editing is not saved, a message box appears asking you to confirm saving before the "New Project" dialog box appears. To
save the project, click "Yes," otherw ise, click "No."
o If you check the "Dow nload the Unit Setting data together w ith the project data" box in this dialog box, you can dow nload the unit settings of the
Remote Commander together w ith the project.
3. Click "Dow nload."
A confirmation dialog box appears.
4. Click "Ye s ."
The settings dow nload to the Remote Commander starts. When dow nloading is complete, a message box appears.
Note s
o If the data capacity to be dow nloaded from AX Remote Editor is larger than the memory capacity of the Remote Commander, an error message
appears w hen you click "Dow nload." In this case, decrease the data capacity by:
 Deleting macros (Action lists).
 Deleting learned settings from keys/buttons.
 Hiding unnecessary keys.
o If the firmw are version of the Remote Commander is older than that of AX Remote Editor, a dialog box appears asking you to confirm updating the
firmw are w hen you click "Dow nload." By clicking "OK," the firmw are is updated.
If you update the firmw are, all the current settings of the Remote Commander are deleted. So proceed w ith caution, being careful not to delete
necessary data.
o If the version of AX Remote Editor is older than the firmw are version of the Remote Commander, a message box appears asking you to update AX
Remote Editor w hen you click "Dow nload." In this case, after checking the firmw are version of the Remote Commander, dow nload the compatible
version of AX Remote Editor from the w ebsite.
o If "The Remote Commander is not connected or not responding." appears, the Remote Commander (RM-AX4000) may not be connected to your PC
properly. After checking the connection, click "Retry" to repeat the operation.
5. Click "OK."
The message box closes.
Page 100