Sony RM-AX4000 - Manual (Page 47)

Changing an Air-Slide's settings (Standard mode)
You can set each Air-Slide pattern to operate an XPRESS procedure.
Note
You cannot set the Air-Slide function w hen no XPRESS key is programmed.
1. Click the "Standard" tab in the low e r le ft of the s cre e n to s w itch to Standard m ode .
2. Click "Se t Up Tim e r or Air-Slide " in the low e r le ft of the s cre e n.
3. Click "Edit Air-Slide " on the right s ide .
The "Edit Air-Slide" dialog box appears.
4. Se le ct an XPRESS k e y you w ant to ope rate by click ing be low the Air-Slide patte rn and s e le cting.
Hints
o If you click "Clear," the setting for the Air-Slide pattern is cleared.
o If you change an Air-Slide pattern in Advanced mode, the drop-dow n list for the Air-Slide pattern show s "Advanced."
5. Click "OK."
The "Edit Air-Slide" dialog box closes, and the setting of the Air-Slide is changed.
Page 47