Additional i nf or ma tion, Tuner, Optional components – Sony LBT-LCD77Di User Manual

Page 115

Advertising
background image

MHC-GZR333i/LBT-LCD77Di.GB.4-181-572-11(1)

11

GB

Additional I

nf

or

ma
tion

The angles cannot be changed.
 Multi-angles are not recorded on the

DVD VIDEO being played back.

 The DVD VIDEO prohibits changing

the angles.

Tuner

The radio presetting is canceled.
 The power cord is disconnected or a

power failure occurred for longer than

a day. Redo “Presetting a radio station”

(page 65).

There is severe hum or noise.

(“TUNED” or “STEREO” flashes in the

display.)
 Set the proper band and frequency

(page 64).

 Connect the antenna properly

(page 23).

 Find a place and an orientation that

provide good reception, then set up

the antenna again. If you cannot obtain

good reception, we recommend that

you connect a commercially available

external antenna.

 The supplied FM lead antenna receives

signals along its entire length, so make

sure you extend it fully.

 Locate the antennas as far away from

the speaker cords and the power cord

as possible, to avoid picking up noise.

 Try turning off the surrounding

electrical equipment.

A stereo FM program cannot be

received in stereo.
 Press REPEAT/FM MODE repeatedly

until “MONO” disappears from the

display.

Optional components

There is no sound.
 Refer to General item “There is no

sound.” (page 103) and check the

condition of the system.

 Connect the component properly

(page 100) while checking:

if the cords are connected properly.

if the cord plugs are firmly inserted

all the way.

 Turn on the connected component.

 Refer to the operating instructions

supplied with the connected

component and start playback.

To change the AM tuning interval

The AM tuning interval is factory-preset

to 9 kHz (or 10 kHz for some areas).

Use buttons on the unit for the operation.

1

Press TUNER/BAND repeatedly to

select “AM.”

2

Press / to turn off the system.

Continued

Advertising