Sony LBT-LCD77Di - Manual (Page 31)

MHC-GZR333i/LBT-LCD77Di.GB.4-181-572-11(1)
1 GB
G
etting S
tar
ted
When using a TV
Turn on the TV and select the video
input so that you can view the pictures
from this system.
Operating a Sony TV
You can use the following buttons to
operate a Sony TV. These buttons have
been marked in yellow.
To
Press
Turn the TV on
or off
TV / while
holding down TV.
Switch the TV’s
input source
between the TV
and other input
sources
TV INPUT while
holding down TV.
Select the TV
channels
TV CH +/ or
numeric buttons*
while holding down
TV.
Adjust the
volume of the TV
speaker(s)
TV VOL +/ while
holding down TV.
* For a double-digit number, while holding
down TV, press -/--, then press the number.
(For example, while holding down TV, press
-/--, then 2 and 5 to enter 25.)
Setting the LCD
You can make adjustments to pictures
displayed in the LCD.
Use buttons on the unit and confirm
operations in the LCD, for the following
settings.
Note
Playback settings stored in the disc take
priority over the LCD settings. Therefore, some
of the LCD settings may not be performed.
1
Press OPTIONS on the unit
repeatedly until “PICTURE
MODE” or “WIDE MODE” appears
in the LCD.
2
Press  or  repeatedly to select
the desired setting, then press
ENTER.
Continued
