Sony STR-DN1040 - Manual (Page 27)

27 US
Co
nne
c
tio
ns
* When you connect a subwoofer with an auto
standby function, turn off the function when
watching movies. If the auto standby function
is set to on, it turns to standby mode
automatically based on the level of the input
signal to the subwoofer, and the sound may
not be output.
** Notes on the SPEAKERS SURROUND
BACK/BI-AMP/FRONT HIGH/FRONT B
terminals connection.
– If you connect only one surround back
speaker, connect it to L of this terminals.
– If you have an additional front speaker
system, connect them to this terminals.
Set the assignment for the SPEAKERS
SURROUND BACK/BI-AMP/FRONT
HIGH/FRONT B terminals to “Front B
Speakers” by using the “Speaker
Connection” in the Speaker Settings menu
(page 95). You can select the front speaker
system you want by using the SPEAKERS
button on the receiver (page 39).
– You can connect the front speakers to this
terminals using bi-amplifier connection
(page 27).
Set the assignment for the SPEAKERS
SURROUND BACK/BI-AMP/FRONT
HIGH/FRONT B terminals to “Bi-
Amplifier Connection” by using the
“Speaker Connection” in the Speaker
Settings menu (page 95).
After you have installed and connected your
speaker, be sure to select the speaker pattern you
want using the “Speaker Connection” in the
Speaker Settings menu (page 95).
If you are not using surround back speakers
and front high speakers, you can connect
the front speakers to the SPEAKERS
SURROUND BACK/BI-AMP/FRONT
HIGH/FRONT B terminals using a bi-
amplifier connection.
Connect the jacks on the Lo (or Hi) side of
the front speakers to the SPEAKERS
FRONT A terminals, and connect the jacks
on the Hi (or Lo) side of the front speakers
to the SPEAKERS SURROUND BACK/
BI-AMP/FRONT HIGH/FRONT B
terminals.
Make sure that metal fittings of Hi/Lo
attached to the speakers have been removed
from the speakers to avoid receiver
malfunction.
After you have made the bi-amplifier
connection, set the assignment for the
SPEAKERS SURROUND BACK/BI-
AMP/FRONT HIGH/FRONT B terminals
to
“ Bi-Amplifier Connection ” by using the
“ Speaker Connection ” in the Speaker
Settings menu (page 95).
Note
Bi-amplifier connection
Front speaker
(Right)
Front speaker
(Left)