Sony STR-DN1040 - Manual (Page 83)

83 US
“
B
R
A
V
IA”
S
y
nc
Fe
a
tur
e
s
One-Touch Play
When you start playback the equipment
connected to the receiver via an HDMI
connection, the receiver and TV operation
are simplified as follow:
If you set “Pass Through” to “On” or
“Auto” (page 99), then set the receiver to
standby mode, sound and image can be
output only from the TV.
• Be sure that the System Audio Control function
is set to on using TV menu.
• When you play back from the connected
equipment, the TV will momentarily loose the
image and sound.
• Depending on the settings, the receiver may not
turns on when “Pass Through” is set to “On” or
“Auto”.
You can also select a connected equipment, such
as Blu-ray Disc player, DVD player from the TV
menu. The receiver and TV will automatically
switch to the appropriate HDMI input.
System Audio Control
You can enjoy the TV sound from the
speakers connected to the receiver by a
simple operation.
You can operate System Audio Control
function using the TV menu. For details,
refer to the operating instructions of the
TV.
You can also use the System Audio Control
function as follows.
• If you turn on the receiver while the TV is
turned on, the System Audio Control
function will automatically activate to
output TV sound through the speakers
connected to the receiver. However, if
you turn off the receiver, the sound will
output from the TV speakers.
• When you enjoy the TV sound from the
speakers connected to the receiver, you
can adjust the volume or turn off the
sound temporarily by using the TV’s
remote control.
• If System Audio Control does not function
according to your TV setting, refer to the
operating instructions of the TV.
• When “Control for HDMI” is set to “On”, the
“Audio Out” settings in the HDMI Settings
menu will set automatically based on the
System Audio Control settings (page 99).
• If the TV is turned on before turning on the
receiver, the TV will momentarily loose the
sound output.
System Power-Off
When you turn the TV off, using the power
button on the TV’s remote control, the
receiver and the connected equipment turn
off automatically.
Notes
Tip
Turns on (if in standby mode)
Switches to appropriate HDMI input
Receiver and TV
Notes
Sets System
Audio Control
to on • Turns on (if in
standby mode)
• Switches to
appropriate
HDMI input
TV Receiver
Minimizes TV
volume Outputs TV sound