Sony STR-DN1040 - Manual (Page 29)

29 US
Co
nne
c
tio
ns
To enjoy the TV broadcast
in multi channel surround
sound from the receiver
* If your TV is compatible with the Audio Return
Channel (ARC) function, connect E.
Be sure to set the “Control for HDMI” to “On”
in HDMI Settings menu (page 82). If you want
to select an audio signal using other than an
HDMI cable (e.g., via an optical digital cord or
an audio cord), switch the audio input mode
using INPUT MODE (page 86).
**If your TV is not compatible with the ARC
function, connect C or D.
Be sure to turn off the TV’s volume or
activate the TV’s muting function.
• Connect a TV monitor or a projector to the
HDMI OUT or MONITOR OUT jack on the
receiver.
• Depending on the status of the connection
between the TV and the antenna (aerial), the
image on the TV screen may be distorted. If this
is the case, place the antenna (aerial) farther
away from the receiver.
• When connecting optical digital cords, insert the
plugs straight until they click into place.
• Do not bend or tie optical digital cords.
• All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
• The receiver has a video conversion function.
For details, see “Function for conversion of
video signals” (page 22).
• When you connect the audio output jack of the
TV to the TV IN jacks of the receiver to output
the TV sound from the speakers connected to
the receiver, set the sound output jack of the TV
to “Fixed” if it can be switched between either
“Fixed” or “Variable”.
To listen to the sound from
the TV
If your TV does not support System Audio
Control function, set the “Audio Out” to
“TV+AMP” in the HDMI Settings menu
(page 99).
4: Connecting other
equipment
High-Definition Multimedia Interface
(HDMI) is an interface which transmits
video and audio signals in digital format.
By connecting Sony “BRAVIA” Sync-
compatible equipment using HDMI cables,
operations can be simplified. See
““BRAVIA” Sync Features” (page 82).
HDMI features
• A digital audio signals transmitted by
HDMI can be output from the speakers
connected to the receiver. This signal
supports Dolby Digital, DTS, DSD, and
Linear PCM. For details, see “Digital
audio formats supported by the receiver”
(page 23).
• The receiver can receive Multi Channel
Linear PCM (up to 8 channels) with a
sampling frequency of 192 kHz or less
with an HDMI connection.
• Analog video signals input to the
receiver’s VIDEO jack or
COMPONENT VIDEO jacks can be
output as HDMI signals (page 22). Audio
signals are not output from an HDMI
OUT jacks while the image is being
converted.
• This receiver supports High Bitrate
Audio (DTS-HD Master Audio, Dolby
TrueHD), Deep Color (Deep Colour),
“x.v.Color (x.v.Colour)”, and 4K or 3D
transmission.
• To enjoy 3D images, connect 3D-
compatible TV and video equipment
(Blu-ray Disc player, Blu-ray Disc
recorder, PlayStation 3, etc.) to the
receiver using High Speed HDMI cables,
put on 3D glasses, and then play back a
3D-compatible content.
Notes
Tips
Using HDMI connection