Sony STR-DN1040 - Manual (Page 34)

34 US
A Optical digital cord (not supplied)
B Audio cord (not supplied)
C Component video cord (not supplied)
D Video cord (not supplied)
E Coaxial digital cord (not supplied)
* When you connect equipment with an
OPTICAL jack, reassign the input jacks. For
details, see “Using other video/audio input
jacks (Input Assign)” (page 86).
• Be sure to change the default setting of the
VIDEO 1 input button on the remote control so
that you can use the button to control your DVD
recorder. For details, see “Programming the
remote control” (page 108).
• You can rename the VIDEO 1 input so that it
can be displayed on the receiver’s display panel.
For details, see “Name” in Input Settings menu
(page 100).
Connecting an iPod, iPhone,
USB device
A USB cable (not supplied)
5: Connecting the
antennas (aerials)
Before connecting the antennas (aerials),
be sure to disconnect the AC power cord
(mains lead).
• To prevent noise pickup, keep the AM loop
antenna (aerial) away from the receiver and
other equipment.
• Be sure to fully extend the FM wire antenna
(aerial).
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
Recommended connection
Alternative connection
Notes
iPod, iPhone,
USB device
A
Notes
FM wire antenna (aerial)
(supplied)
AM loop antenna (aerial)
(supplied)